OJ


Fly: John Gordon, Photograph: Hans Weilenmann

Hook: Daiichi 1270 or Tiemco 200R (size #22)
Bead: Midge or small size. (Orange)
Thread: 8/0 Uni-thread (Fl. Orange)
Body: Orange D-rib (Midge size) or orange micro tubing

Tying instructions
  1. Debarb and place bead on hook.

  2. Wrap in just enough thread behind the bead to lock the bead against the hook eye.

  3. Tie in your D-rib. Be sure the tag end doesn't hang over the bead. Pull up on the tag end and cut flush. By pulling up on the D-rib it will snap back making a clean appearance with the rest of the body.

  4. Wrap the D-rib around the hook. Adjust the tension while wrapping by stretching the material. This will help give the body a tapered look. Start working your way back to the barb. Be sure to do side-by-side wraps. Don't overlap. Once you’re just past the hook barb then overlap and start your way back to the bead.

  5. Tie off the D-rib just behind the bead. Pull up on it and cut off flush.

  6. Wrap your thread just behind the bead and create a tapered look up to the bead. Whip finish and coat the thread only with head cement.




Back to Thumbnails

© 2008 Hans Weilenmann
Please don't copy/distribute the contents of this page without my explicit permission.